How To Power On Transmitter

Written By: Adam Bell
  • Comments: 1
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

Flags

0

Introduction

It is important that you turn everything in on and off in the correct order to prevent injury. If the engine accidentally turned on you may damage your plane/heli and you may also get hurt.

  1. Put throttle sitck in idle position

    • Put throttle sitck in idle position

    Edit

  2. Turn on transmitter and wait for home screen to appear

    • Turn on transmitter and wait for home screen to appear

    Edit

  3. Select the correct model from model memory

    • Select the correct model from model memory

    Edit

  4. Extend the atenna

    • Extend the atenna

    Edit

  5. Turn on the power on the receiver

    • Turn on the power on the receiver

    Edit

  6. Test all controls to see if servos are functioning

    • Test all controls to see if servos are functioning

    Edit

  7. Start engine

    • Start engine

    • perform range check

    Edit
  8. Edit

  9. After flight, bring throttle back to idle

    • After flight, bring throttle back to idle

    Edit

  10. Turn off receiver and then turn off transmitter

    • Turn off receiver and then turn off transmitter

    Edit
Finish Line

One other person completed this guide.

Author

Adam Bell

Member since: 02/14/2012

67 Reputation

3 Guides authored

One Comment

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 940